Engine Accy's Ignition

|

Current Projects

|

|

|

|

|

|

|

Finished Projects

|

|

|

|

|

|

Bodies & Chassis

Engine Ignition Accy's

	Taylor Spark Plug Wires			Plug Wire Looms
	Distributors Parts & Accy's			Plug Wire Separators
	LT-1 Distributors, Parts & Info			Distributor Clamps
	Coils			Coil Brackets

	SPIRO-PRO	8mm Universal-Fit ignition wire is the top choice of racers & enthusiasts, 100% silicone inner core & outer jacket, Taylor Cables's Spiro-Wound Core provides more fire power than OEM & 10 times less resistance than standard resistor core wires. Spiro-Pro's are the highest temp rated wire on the market (600°F) w/o the need for additional sleeving. (Black in stock, allow 2 days for colors) ------------------------------------------------------------ 73051 - 90° Plug Boots, Black 73053 - 135° Plug Boots, Black 73055 - 180° Plug Boots, Black	$66.95
	LT-1 Wires TA1520	Made just for the LT-1's with headers Specify using '92-95 or '96-97 coil (black only) (See below for plug wire separators for LT-1)	$79.95
	Wire Repair Kit 045403 (black)	Taylor Repair Kits provide easy replacement for damaged individual wires. Spark Plug Wire Kits have factory installed 90° plug boot on one end and 180° spark plug boot on the other. (black wire)	$13.95
	LT-1 Boot Kit 46052	LT-1 Opt iSpark Distributor Boots & Terminal Kit. High temperature 8mm silicone boots.	$14.95
	Crimp Tools 43390 43395	43390 - Multiple Purpose Pro Wire Tool - made of high carbon steel, cuts & strips primary wire from 10-22 ga. Crimps insulated & non-insulated solderless terminals. Crimps 7-8mm spark plug wires ends. 43395 - Spiro-Pro/.409 Strip & Crimp Tool - cuts just the right amount of wire insulation, without damaging the Spiro-Wound conductor. Crimps terminals with aid of bench vise. 8mm/10.4mm sizes.	$12.95
Wire colors available	Black (in stock), Red, Blue, Yellow, Purple, Hot Orange, Hot Lime, Hot Pink, Hot Teal, White
Plug boots available	90° \| 135° \| 180°

Back to Top of Page

Plug Wire Accy's

	Plug Wire Looms 1101-C	Chevy: 1955-86 262-400, chrome, aluminum, wire loom This set of wire looms uses injection-molded insulators anchored to a billet aluminum bracket with recessed socket head cap screws. They hold up to 8.5 mm plug wires. This setup allows you to route your wires away from exhaust heat without worrying about them coming loose. ---------------------------------------------------------------- 1101c - Chrome - $62.95 1101k - Black - $49.95	see below
	Billet Wire looms SUS1330	Universal wire looms, can be adapted to most any V8 engine. One piece alum. looms feature a thread track along the full length of the loom. Comes with tabs for attachment to existing valve cover bolts. - Polished	$43.95
	SB Chevy Under Header Wire Looms, 8773 Black	Designed to route spark plug wires under the headers on old & new style Small Block Chevy engines. Each kit includes two 2-hole dividers, two 4-hole dividers, four chrome brackets, two 2-hole separators, two 3-hole separators and two 4-hole separators. These looms provide for easy removal & installation of valve covers. For 7, 8, & 9mm wires. Prevent cross firing and extend wire life.	$16.95
	Accel Competition Wire Loom Kit 170057	Valve cover mounted loom kit for racing or street use. Includes 2-4 wire separators, 8-2 wire looms, and 4 valve cover mounted dual loom brackets. Specially designed for small block Chevrolets, but will also fit other engines.	$22.95
	Center Bolt Chevy Loom Kit 7/8mm, Black 50-35611	Designed for GM Center Bolt Valve Cover engine applications, these separators offer a neat and professional appearance that is easy to install and protect your plug wires from high heat areas of the engine. This kit is for 10.5mm wires, and comes with stainless steel hardware.	$30.95
	Horizontal Loom Kit 7/8mm 50-95611	The Horizontal Wire Loom Kit allows spark plug wires to be mounted horizontally. Separates, organizes, and protects the plug wires from heat and vibration. Precision molded from Zytel 6-6 Nylon, these separators will not melt, fade, distort, stain, or discolor under normal use. Are not affected by brake fluid, antifreeze, fuel, solvents, heat, or cold. Non-conductive, includes stainless steel hardware	$27.95
	Vertical Loom Kit 7/8mm 50-75611	The Vertical Wire Loom Kit allows spark plug wires to be mounted vertically. Separates, organizes, and protects the plug wires from heat and vibration. Precision molded from Zytel 6-6 Nylon, these separators will not melt, fade, distort, stain, or discolor under normal use. Are not affected by brake fluid, antifreeze, fuel, solvents, heat, or cold. Non-conductive, includes stainless steel hardware	$27.95
	Center Bolt Chevy Aluminum Brackets 50-82494	These brackets work in conjunction with part #MFY-50-75611 Vertical Wire Loom Kit for use on GM Center Bolt Valve Cover engine applications. Contains four brackets with mounting hardware.	$17.95
	Clamp Style Wire Separators 42700 Black	• Separates, organizes & supports ignition wires • Neat professional look. • Molded from non-conductive type 6/6 nylon • Will not melt, mar, distort, crack or fade • Your choice of 3 colors • Available for 7-8mm and “409” 10.4mm wire sizes • Stainless steel hardware • Each kit contains: 2 ea. - 4 wire separators 2 ea. - 3 wire separators 2 ea. - 2 wire separators	$14.95
	Mounting Brackets for Clamp Style Separators 42701-Horz 42705-Vert Black	• Mounts Clamp Style Separators to valve covers • Available in horizontal and vertical mounting styles • Small block kits contain 4 brackets per package • Choice of 3 colors, made of type 6/6 nylon • Fits 7-8mm and “409” Clamp Style Separators • Middle photograph shows 4-wire style separator mounted to horizontal style bracket.	$16.95
	“T” Clip 409 Wire Separators 42609	• Secures 2 “409” Pro Race Wires for tight fit areas • Easy installation • Inexpensive way to provide neat and professional looking routing • 4 “T” clips per package	$8.95
	Clip-On Colored Wire Separators 42800 Black	• Fits 7-8mm spark plug wires • Available in 4 colors • Each kit contains: 2 ea. - 4 wire separators 2 ea. - 3 wire separators 2 ea. - 2 wire separators	$8.95
	Moroso Wire Separators 72163	Protects against heat damage and crossfire by firmly holding plug wire away from one another. Includes two 2-hole, two 3-hole and two 4-hole separators.	$7.95
	Spark Guard 8804	MSD's Spark Guard is a dielectric grease that solves many common ignition problems. Just a small amount of Spark Guard inside the boot will stop voltage leaks, ease boot removal, prevent moisture build-up and even add EMI protection. The grease will not harden or dry up so it retains its spark isolating capabilities indefinitely. 1 oz cup	$12.95

Back to Top of Page

Distributors, Parts & Accy's

	Mallory Unilite w/vacuum advance 47 Series	Electronic ignition distributor with a self-contained optical pickup & module. Easy 3-wire hookup. Adjustable mechanical & vacuum advance. 48201	$228.95
	Unilite Ignition Module 605	Replacement module for the distributor above	$104.95
	Unilite Dist Cap 209M	For V-8 Unilite style distributors (With or without vacuum advance)	$19.95
	Unilite Dist Rotor 322	For V-8 Unilite style distributors (With or without vacuum advance)	$11.95
	HEI Distributor w/coil R3920	Hi Performance control module Brass Terminals on cap Hardened Gear 50,000 volt coil Capacitor prevents radio static	$138.95
	HEI Distributor Kit 8474 With MSD Blaster SS Coil	If the large cap HEI Distributor won’t fit in your car, this Ready-to-Run kit is your answer. The Ready-to-Run distributor features a built-in spark energy intensifier which provides a much more powerful spark than the stock HEI. MSD’s race proven mechanical advance allows you to tune in an ignition curve while a vacuum advance provides street economy. NOTE: Replaces 4 and 5-pin HEI modules only. On 5-pin systems the Knock Sensor is not retained.	$355.95
	Distributor Hold Downs 1009	This clamp holds the distributor or magneto securely in place for accurate timing. Brightly chromed, the kit replaces stock wire clamps (1963 & later). Serrations on the bottom prevent distributor rotation. Includes bolt & gasket.	$3.95
	Distributor Hold Downs 6197	This clamp features rolled edges for extra strength & is ideal for use on magnetos, as well as standard & electronic ignition distributors. Clamp is complete with bolt or stud mounting, flat & lock washers, a nut & dist. gasket. Bright chrome finish.	$7.95
	Vacuum Advance cover 6012G	This cover is chrome plated for lasting beauty. It will fit most tapered style vacuum advance units. A notch has been placed in the side of the cover to accommodate distributors with hold down bolts placed near the advance unit. To insure the cover will not come off, three 1" strips of double sided tape have been added to the inside of the cover	$7.95
Back to Top of Page
	Coil Bracket 9767	Universal GM-OEM vertical mount. Chrome plated steel coil bracket features universal design to accept most stock coils.	$6.95
	Coil Bracket w/cover 9777	Universal coil cover/bracket horizontal mount. Chrome plated steel coil bracket features universal design to accept most stock coils.	$7.95
	Coil Bracket 29224	Universal coil bracket horizontal mount (with coil resistor mounting tab). Chrome plated steel coil bracket features universal design to accept most stock coils.	$10.95
	Ballast Resistor 1.82 Ohm 150150	Precision wound by computer to ensure accurate resistance value - Premium quality ceramic resistor bodies provide max durability & superior heat transfer - Special resistance wire maintains stable coil current to prevent overheating & to promote long points life. Recommended whenever a new coil is installed.	$9.95
	Chrome Mallory Coil 29216	Universal, 12-volt coil features an oil-filled design & arc resistant alkyd top for superior performance, insulation & cooling. Delivers optimum perf. when used with Mallory Unilite or Magnetic Breakerless Distributors equipped with a capacitive discharge ign.	$40.95
	Chrome Coil w/resistor R9203	Chrome 60,000 volt coil with 1.4 ohm ballast resistor. For pre-1974 & use on application without HEI.	$31.95
	MSD Firewall Feed-Thru 8212	If you have your coil mounted in the passenger compartment, you need the Firewall Feed-Thru. The Feed-Thru offers a half inch of spark isolation through a rynite mold to ensure that the spark gets to the distributor cap instead of jumping to ground at the firewall. A brass rod is surrounded by an injection molded rynite and nylon housing to form a spark isolating path through the firewall. Spark plug style terminals are used for strong Coil Wire connections. Mounts in a 1" diameter hole with supplied hardware.	$12.95
	Moisture Eliminator Kit 601108	1992-1994 LT-1 Opt iSpark distributor Moisture eliminator kit The most common cause of a non-start or rough running condition on LT-1 engines is moisture in the dist. This kit keeps the moisture out of the module with a permanent seal. Installation instructions included.	$27.95

Back to Top of Page

To Order any items on our site:

Call: (864) 269-6813

or

E-Mail to: rodshop@carolinarodshop.com

Copyright © 2007 Carolina Rod Shop, Inc.