Modified Rod Parts

Modified Rod Parts Logo
"Do It Your Self Parts"

Engine Mounts

Universal Engine Mounts System
Mount your engine easily with these prefabricated engine mounts

	Just locate the position for your engine.
	Use the provided template to draw the length & shape of the mounting end of your mount where it meets the frame.
	Lay the template on the mount & cut to shape.
	Install mount on engine, position on frame & weld.
Your engine is mounted !

Universal mounts (fits Chevy)
(does not include the rubber mount that bolts to engine)

#CHEVY0001

$75.00

Universal mount with std Chevy engine mount installed
(Ford & Chrysler adapters attach to this mount also, not included with kit)

Ford adapters (pair)
(must be used with the universal mount above)

#FORD0002

$75.00

Chrysler adapters (pair)
(must be used with the universal mount above)

#CHRY0003

$43.00

Motor Mount Covers
	Polished Stainless Steel motor mount covers. Dress up those old rubber motor mounts with these flamed SS covers. Pair #CVRCF0006	$42.00

Stainless Steel Universal Engine Mount with Flames

Flamed Polished SS Engine Mount
A universal engine mount that bolts directly on the SBC. Has built-in rubber shock mounts.

#CHEVYF0010

$115.00

LS-1 Engine Mounts
	LS-1 adapter plates polished stainless steel #LS10007	$140.00
	LS-1 adapter plates steel, paintable #LS10008	$85.00
	LS-1 adapter plate mounted with the Universal motor mount kit

Battery Boxes
	Drop Down Battery Box Made out of Stainless Steel Measurements: * Inside: 10-3/8" x 7" * Height in front: 4-1/4" * Height in back: 9" Hold down heights: * 6-3/4", 7-1/8", 7-9/16", 8" Drops by 4" to next latch location #BBOX0009 With polished front = $165.00 #BBOX0010 (Can be dropped all the way out)	$150.00
	Non-Drop Down Battery Box Made out of Stainless Steel (polished) Measurements: Inside: 10-3/8" x 7" Height in front: 2 " Height in back: 5 " Hold down heights: 6-3/4", 7-1/8", 7-9/16", 8" Overall height L #BBOX0011	$125.00

Universal Transmission Crossmember

Universal use crossmember for mounting your transmission
Designed to leave you room to run your exhaust system.
Bottom of the mounting pads are parallel with the transmission mount area.
Made of 2-1/2" tubing.
#CROSM0017

Width = 34" (trim to fit)

$125.00

Flame Emblems
	Polished Stainless Steel Flame Emblem Approximately 5-3/4" long x 1" high Sold as a pair (LH & RH) (use double sided molding tape to mount) #FLMS0016	$20.00
	Polished Stainless Steel Street Rod Flame Emblem approximately 6 " long x 1-1/8" high Sold as a pair (LH & RH) (use double sided molding tape to mount) #SRFLM0015	$24.00

Steering Column Drop Kits
	Polished Stainless Steel Steering Column Drop Drops column approximately 2-1/2" Comes with insert for 2" column Also available are inserts for 2-1/4" & 2-3/8" columns ($33.50) (Inserts may be exchanged at no extra cost a time of purchase) #SDROP0011	$125.00
	Polished Stainless Steel Steering Column Firewall Mount w/flames Mounts your steering column at the firewall with style. #FWSM0001	$49.95
	Polished Stainless Steel Switch Panel Use to mount your switches under the dash next to the column drop (above) #SWPNL0014	$29.50

Polished Stainless Steel Flamed Steering Wheels

Polished Stainless Steel Flamed center steering wheels wraped in Black Leather
(fits Lecarra style center bolt pattern)

#STEERING WHEEL

$225.00

Close-up of Center Flames

Telephone	864-269-6813
FAX	864-220-0507
Postal address	Carolina Rod Shop, Inc. 405 Hwy 183 Piedmont, SC 29673
Hours	8:30-5:30 M-F 8:30-12:00 Sat

Universal Engine Mounts System Mount your engine easily with these prefabricated engine mounts

Universal Engine Mounts System
Mount your engine easily with these prefabricated engine mounts